hans device
size guide

Simpson Hybrid Sport Device FIA Approved – Various Sizes – Adult

£574.80£630.00 inc. VAT

Clear selection
SKU: SI002 SI003. Category: .

Product Description

FIA & SFI Approved

Simpson Hybrid devices are the only FIA approved Head and Neck Restraint on the market that protect during front and offset impacts. Designed for easily exiting the car without the danger of getting hung up on other gear, the device sits on your back/shoulders, not over the chest or collarbone as with the old HANS-type devices. Plus, they provide you with maximum comfort and maneuverability.

 

An evolution of the Hybrid Pro Rage, the new Hybrid Sport device improves upon the design and technology which promises the racer an improved product, at the same price range as the old model. The Hybrid Sport is lighter, weighing in at 20% less for the large, including hardware; and the DuPont carbon/polymer construction is sleek, modern and appealing with defined wings for better harness containment. The sliding tethers and multi-tether system enhances the side to side range of movement and field of vision. The Hybrid Sportis SFI approved and FIA certified however in Child and Youth sizes it is just SFI 38.1 certified.

 

  •          ‘Slide’ design offers increased visibility
  •          DuPont carbon/polymer construction
  •          Unrivalled angular impact protection and device stability
  •          Low profile. No high back to hook on the bars on exit
  •          Minimalistic design. Compact size under 7“
  •          Multiple load paths to dissipate head loads
  •          Buckle attachment in front. No bulky straps underneath
  •          FIA 8858-2010 approved

Size Options

The Size Options are shown below:
Child

XS Child under 22″

Child 22-26″

Youth 26-30″

 

Adult

XS Adult 32-36″

Small Adult  36-40″

Medium Adult 40-44″

Large Adult 44-48″

XL Adult 48-52″ 

The Hybrid Sport is supplied ready to fit to your existing FIA Hans posts or can be specified with optional M61 quick release tethers / anchors. These M61 anchors are fitted in place of your original Hans posts (offered at an additional cost).

 

HANS – Post Anchor - These tethers allow the driver to use the Hybrid device with helmets that have standard fitment HANS anchors already fitted (or the correct approval to retro-fit anchors). Approved for helmets FIA 8858-2002 / FIA 8858-2010 standard or higher.

 

M61 – Quick Release - These tethers allow the driver to release the restraint by a simple pull on the cord attached to the helmet. Approved for helmets FIA 8858-2010 standard or higher. Ideal safety addition for motorsports where the risk of rolling a vehicle is higher or in motorsports such as Rallying where the helmet may be taken on and off more frequently (i.e. between stages).

 

Weight – approx 950g complete

Additional Information

Size

XS, S, M, L, XL