Brake Residual Pressure Valve 10PSI - for Drum Brakes

Brake Residual Pressure Valve 10PSI – for Drum Brakes BR204

£16.18 inc. VAT

SKU: BR204. Category: .

Product Description

These residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The 10 PSI valve is used in drum brake applications where the valve is used to compensate for return spring tension and to maintain wheel cylinder sealing inside the drums.

DESIGN
Made from billet aluminium
Annodised silver
M10 x 1mm thread – industry standard thread type for brake systems
Arrow on the valve shows direction in which the valve should be placed
Factory set pressure of 10PSI
USE
Install the valve as close as possible in line to the master cylinder to ensure as much of the line as possible is pressurised
Enhances brake performance as it holds a constant pressure in the brake line, ready for the system to be activated
Greatly aids turning under braking

WARNING
IT IS THE RESPONSIBILITY OF THE PERSON INSTALLING AND BRAKE COMPONENT OR KIT TO DETERMINE THE SUITABILITY OF THAT COMPONENT OR KIT FOR THAT PARTICULAR APPLICATION. IF YOU ARE NOT SURE HOW TO SAFELY USE THIS BRAKE COMPONENT OR KIT, YOU SHOULD NOT INSTALL OR USE IT. DO NOT ASSUME ANYTHING. IMPROPERLY INSTALLED OR MAINTAINED BRAKES ARE DANGEROUS. IF YOU ARE UNSURE, SEEK EXPERT PROFESSIONAL QUALIFIED HELP OR RETURN THIS ITEM TO US. YOU, OR THE PERSON WHO INSTALLS THIS PRODUCT, MUST KNOW HOW TO INSTALL OR PROPERLY USE THIS PRODUCT. IT IS NOT POSSIBLE TO OFFER TECHNICAL ASSISTANCE OVER THE PHONE TO UNDERSTAND OR FORESEE ALL THE ISSUES THAT MIGHT ARISE IN YOUR SPECIFIC INSTALLATION. RACING EQUIPMENT AND BRAKES MUST BE MAINTAINED AND SHOULD BE CHECKED REGULARLY FOR DAMAGE, WEAR OR FATIGUE.

Additional Information

Weight .5 kg